The design of a plywood cold press machine will depend on the specific needs and requirements of the manufacturer.

The production methods of plywood manufacturers are generally divided into three types: wet heat method, dry cooling method and dry heat method.

Plywood is one of the commonly used materials for furniture, and is one of the three major wood-based panels. It is a slab made of glued veneers crisscrossed in the direction of the wood grain, and pressed under heating or non-heating conditions.

Cold press machine is the auxiliary in plywood production line, which is used to shorten the cycle time of hot press and improve the quality of plywood before gluing board.

The machine is widely used in furniture, using frame structure, has the advantages of compact structure, easy operation,convenient maintenance, beautiful appearance. The hammer fast hit process, ensure the plate furniture assembly in place, good assembly effect, pressure head and the work table covered with rubber plate, pressure and prevent furniture scratch, is the best equipment combination furniture assembly.

China Plywood Cold Press Machine for MDF boards.
Cold press is also call pre-press,it is a necessary equipment for processing plywood,suitable for 3'x7',4'x8' plywood production.
Before hot press,cold press could press the core veneer together to ensure veneer surface flat and quick-remove.

Type hydraulic woodworking cold press machine has the advantages of many traditional cold press does not have, is one of the most prominent characteristics and advantages of his work noise is small, and the work efficiency is very high, lifting very quickly.

This machine is mainly used for veneer press of all kinds of plane woodware and prepressing and moulding. The press quality is good, speed-fast and high efficient. It is widely used in furniture industry and other panel production industry.

Cold press machine is necessary machine for plywood making line.Glued veneer face veneer and core veneer are moulded a whole sheet of plywood by hot press.Thermal oil heating type.Customized Pressure and opening layers.

What is Cold press plywood?
A plywood cold press machine is also referred to as a pre-press machine. It is basically an auxiliary machine as far as the plywood production line is concerned. Its main purpose is to reduce the cycle time that is needed in case of hot press and thus make the plywood better in terms of quality before it gets glued.

The hydraulic press machine adopts a single-column split structure and is welded with high-quality steel plates to be smooth and without defects. The fuselage consists of a workbench, support, and an upper beam through five pulling AW-C rigid frames.

Plywood cold press with loading system and 500 ton Cold Press with conveyor loading system

Our company has focused on woodworking machine for over 15 years in China. We started as a small operation, but now have become one of the leading suppliers in the timber industry in China. Well-equip, first-class technical staff and a strong technical development and innovation ability and...

Industrial cold press series models are used to press furniture panels, wooden doors and various panels. Including the leveling and shaping of furniture. It can make the bonding between the boards more firmly. The pressure is strong and does not pull back. The working form of woodworking cold...

Plywood cold & hot press machine is used for plywood production, its function is pressing the veneers which with glue together under high pressure and high temperature, machine is hydraulic system, heating method can be both steam heating and hot oil heating. ​

Parameters: Nominal Total Pressure:5000KN Rated Pressure:25MPa Specification of Main Oil Cylinder :320*2PCS Interlayer Spacing: 1900MM Heating Medium: Steam Power: 15kw High Pressure Pump:25ML/R Low Pressure Pump: 160ML/R Work Table Size:2700*1300MM Advantages of our products: 1.Strict...

Established in 2007, Zhangzhou Xinhuacheng Machinery Manufacturing Co., Ltd is a manufacturer and trader specialized in the research, development, and production of all kinds of plywood machine.

500T Veneer Cold press with loader and unloader for oversea, like Indonesia, Vietnam, Philippine, Cambodia and etc

Woodworking cold press series models are used to press furniture panels, wooden doors, various panels, as well as furniture leveling and shaping. It can make the bonding between panels more firm. The pressure is strong and does not pull back. The working form of woodworking cold press can be...