Adopt high -frequency heating, pressure and other processing technologies, based on automation technology and accurate calculations for boarding board processing.

The pinch transmission and guillotine of the veneer splicing machine are all controlled by servo motors and PLC coding programs.

4FT/5FT etc can be customized.
Core veneers of different lengths and sizes can be connected together with high-strength threads and hot-melt adhesives. 
The whole process can be operated by one worker, saving time and efficiency.

4FT/5FT etc can be customized.
Using the servo-driven fully automatic,simple operation, labor-saving.

The overall structure is stable and reliable;Use electrical and electrical control system;Can be customized.

Core veneer composer are bonded using glue lines and dots of hot melt glue to ensure that no overlap occurs in the veneer pad.Using servomotor replace clutch brake drive can be more precision composing veneer edge for jointing perfectly. PLC contral, the veneer becomes strong both laterally and vertically.

This machine is an L-model vertical splicing intelligent automatic equipment, which can convert the horizontal splicing machine discharge board into a vertical splicing machine, and can splicing 1.5-2.5mm thick wood boards, completing 4 feet * 4 feet, 4 feet * 8 feet, 4 feet * 10 feet, 4 feet * 10 feet, 4 feet * 12 feet and other product boards, the effect is 4-5 sheets/min.

The machine frame is made by laser cutting, stable and durable.the steel thickness is 16mm.Siemens servo drive,that can protect veneer from overlap.Rotary cylinder control glue sticking position accuracly.That guarantee veneer no any overlap.

This design only needs one person to operate, and can produce 6 pieces of 4*8 feet whole board per minute, more than 3500 pieces per shift, which greatly improves the production efficiency and reduces the production cost. The plate production process is integrated, and the strength and overall quality of the plate are increased.

Scarfing is to veneer what finger jointing is to lumber.

Composing and splicing both join the veneer parallel to the veneer direction.

Scarfing joints it end to end, for example 2 sheets of veneer where are 1270 mm across the grain and 1270 long grain direction, then by scarfing, making the sheet to 2540 mm long grain.