After the equipment is heat treated and finished, the surface of the machine will be smoother and the equipment will be more durable. Daily equipment maintenance is also very important. The maintenance knowledge of the sander is shared below.
1.Clean, remove sawdust, dust every day after use, and keep the sander clean before the next use.
2.Check the lift table regularly every week, and pay attention to adding butter, no dry grinding is allowed.
3.Check the sand roller bearings every week, and pay attention to adding butter to prevent the wear of the machine.
4.Conveyor belt, reduction box, check and replenish monthly, change gear oil every year.
5.Conveyor belt, check and adjust balance, degree of wear and tear, and whether there are cracks.
6.Electrical box, clean regularly, and fasten terminals.
1.The machine is mainly used for sanding processing of plywood, blockboard /wood core board, wood board, particleboard and MDF board surface.
2.The sand light roller is inclined to set, the pressing plate is provided with an inclined roller, and the angle of the horizontal direction of the feeding direction is formed.
3.Beam, beam, tension pressing plate made of iron castings, greatly improves the stability of the machine.
4.All bearings NSK, pneumatic components for AirTAC, Major electrical appliances for Schneider.
5.Rocker arm type control panel, reasonable layout, Simple and convenient operation.
6.Feed adopts frequency conversion and speed regulation, high production efficiency.
| Processing width | 40-1300mm |
| Processing thickness | 3-80mm |
| Processing length | ≥ 750mm |
| Speed of sanding belt | 24m/s |
| Size of feeding | 5-40m/min |
| Size of sanding belt | 1330×2850mm |