The sander is used to sand and polish the surface of plywood to make the surface smoother and flatter. The whole operation is efficient and easy to understand, but some safety knowledge needs our attention.
When the sanding machine is running, the sand disc, grinding wheel, abrasive belt, and polishing wheel of the sanding machine may crack and burst at any time. Glasses, helmets, masks and other corresponding protective equipment must be worn during operation.
During the operation of the sanding machine, hands and feet are strictly prohibited from touching the abrasive belt, grinding wheel, grinding head, polishing wheel and other rotating accessories.
A lot of dust will be generated when sanding, so wear a mask.
When the automatic sanding machine is used, there must be supporting dust removal equipment, otherwise it is very easy to malfunction, damage the equipment, and affect production.
When the belt sander is found to be deviated, it should be adjusted in time.
Wheel sanding must confirm the exact running direction of the grinding wheel, and lock the grinding wheel to prevent the grinding wheel from flying out.
1.This heavy-duty wide belt sander is mainly used for calibrating and polishing of glulam, solid board, composite floor board, blockboard, plywood, etc.
2.The high rigidity and high strength body with heavy plate makes the stability of this machine greatly improved compared with conventional machines.
3.The lifting system adopts the high-precision ball screw mechanism, which greatly improves the accuracy and stability of the machine.
4.The control panel with press-button, dial plate and digital display makes the operation easy.
5.This machine is an upper floating sanding machine and is suitable for connecting to the production line.
Processing width | 40-1300mm |
Processing thickness | 3-80mm |
Processing length | ≥ 750mm |
Speed of sanding belt | 24m/s |
Size of feeding | 5-40m/min |
Size of sanding belt | 1330×2850mm |