This browser does not support the video element.
Spindle wood peeling machine is the main equipment for the plywood production, which can peel the log into veneer in a more stable and more accurate way. It can be used to peel different kinds of large diameter wood. The thickness of veneer produced by this machine is more uniform and the surface is more smooth comparing to spindleless peeling machine. Due to it’s high accuracy in thickness most of the machines are used for face veneer peeling which means less thickness veneer. But it can be used for producing high thickness veneer as well. Both are getting good results.
The defect of this machine is the center log after peeled still in little big diameter such as 8cm. If want to use this log then we have to put to spindleless peeling machine to peel it until around 2.4cm diameter.
We provide one-stop all solutions, according to customer workshop site situation and customer requirements for products and the use of raw materials, reasonable to provide the best cost-effective machines.
Easily strips layer without clamper
Automatic control
Thickness is adjustable
High load setting
Special roller treatment
Facilitate double speed cutting
Log Peeling Machine Specifications
Substantial obligation development
High speed technology used in the manufacturing
User-friendly
Fully electrical control board
Uses Back-up move framework
Utilizes water driven and Pneumatic capacities
Throwing by screw sort mechanized axle
exceptionally planned for peeling medium & super little breadth logs
supplementary lacquer convalescence utility
One of a kind outline to suit Core Veneer generation line
Suitable for Tropical and Plantation Wood Species
This article will examine the peeling routines or ways bark is evacuated to uncover the characteristic excellence of the wood. Every peeling method utilized is connected with a conventional drawknife, permitting the expert to make precisely the look they expect. There are many manufacturers offer qualitative log peeling machine for you.
With any peeling system first take after these progressions to set up the log.
Secure the log on either end with a seat clip with enough of the measurement over the brace beat so not to hit the cinch when peeling over the closures of the log. Keep in mind too that if end will be made into a tenon end, you don't have to peel the last few inches. Subsequent to verifying your drawknife is sharp remain close by the log remaining sufficiently over to get a straight line with the feed and not an unbalanced movement or contacting far, you ought to be agreeable.