It is mainly used in 1200T-2000T double side laminating of melamine paper for MFD, chiipboard.it can laminate the board in matt, glossy, relief furniture plate.

Sanding machine is a mechanical equipment used for grinding uneven and uneven materials to smooth and even thickness.
The double-head sanding style is most commonly used because it is efficient and can be sanded on both sides of a line at the same time.

BG1344 four-layer roller dryer is a special equipment for drying plywood core board, including 15 Section heating and drying room, 2 sections of cooling room, two sets of speed control transmission system, feeding roller table, plate output roller table, moisture removal system.

Scarfing is to veneer what finger jointing is to lumber.

Composing and splicing both join the veneer parallel to the veneer direction.

Scarfing joints it end to end, for example 2 sheets of veneer where are 1270 mm across the grain and 1270 long grain direction, then by scarfing, making the sheet to 2540 mm long grain.

600T-800T Multi-layers lamination press machine is mainly used to laminate the melamine impregnate paper for the plywood,sandwich plate,furniture board and so on. We also have short cycle melamine press line for MDF board, Particle board, Chipboard.

Semi-automatic veneer dryer machine.This model support automatic feeding,humidity detection,Circulating hot air, ect.
The parameters can be adjusted according to the output and plant planning.

The heat compressor plays an indispensable role in the production process of the factories. It can process the plates of various processes, such as furniture boards, building membrane plates, film coverage, flame retardant boards, etc.

This model is straight-through horizontal circulation dryer. Its thermal circulation design draws on the technical advantages of advanced Dryer in Europe. It adopts vertical centrifugal fan with volute (flow rate up to 6.8 More than 10,000 ㎡/h).

Cold press machine is necessary machine for plywood making line.Glued veneer face veneer and core veneer are moulded a whole sheet of plywood by hot press.Thermal oil heating type.Customized Pressure and opening layers.

What is Cold press plywood?
A plywood cold press machine is also referred to as a pre-press machine. It is basically an auxiliary machine as far as the plywood production line is concerned. Its main purpose is to reduce the cycle time that is needed in case of hot press and thus make the plywood better in terms of quality before it gets glued.

What is the resin glue?
Resin glue is a type of adhesive used in the construction industry that provides superior bonding capabilities. Because of its long curing time of as much as ten hours, it is ideal for woodworking applications, which require unhurried and careful assembly.

We can manufacture suitable dedicated production line for customer according their requirements. So far we have developed 3 x 6 feet, 4 x 8 feet and other various specification, which meets man-made board companies' requirements.

The multi-functional automatic roller sawing table, the higher the plate requirements, the higher the requirements for the automatic sawing edge. And to save labor, so you need to choose the saw table that is right for you.

The hydraulic press machine adopts a single-column split structure and is welded with high-quality steel plates to be smooth and without defects. The fuselage consists of a workbench, support, and an upper beam through five pulling AW-C rigid frames.

Spindle wood peeling machine is the main equipment for the plywood production, which can peel the log into veneer in a more stable and more accurate way.

Veneer peeling machine with spindle peeling and spindle less peeling. Their operating principle is the same, just the power source that drives the rotation of the logs is different.

The stainless steel plate for hot press is used to protect the hot press plate from corrosion due to the glue of the plate, and can avoid the situation of sticking to the plate. It has a certain protective effect on the hot pressing plate. The material of the stainless steel plate is different, the effect is different, there are various patterns, and the thickness is also different.

 

A hot press is a type of hot press that heats two parts pre-tinned with flux enough to melt and flow the solder. After curing, it creates a permanent electrical and mechanical connection between the part and the solder. The performance of the heat press should vary between different products, and some can choose the heating rate.

In order to make high-quality veneer, improve the veneer output rate and the productivity of the rotary cutter, the logs after entering the factory need to undergo processes such as sawing, heat treatment, peeling and wood section centering.

We are actively engaged in manufacturing and supplying an excellent range of Plywood Hot Press Platen which is widely used in hydraulic press. Our offered platen is manufactured using superior quality components and the latest technology as per set industry standards. Further, our quality experts strictly examine this platen against well-defined quality parameters, in order to offer flawless supply at clients' end. Our clients can avail this platen from us in several technical specifications as per their requirement.