Availability: | |
---|---|
Quantity: | |
XHC-1200T
XHC
846599
Items model | 1200T | 1800T | 2000T |
Pressure | 12000KN | 18000KN | 20000KN |
Veneer size | 1220*2440MM | 1220*2440MM | 1220*2440MM |
Unit pressure | 40 | 60 | 66 |
Hot plate size | 140/100*1400*2600MM | 150/100*1400*2600MM | 160/120*1400*2600MM |
Main oil cylinder dia&number | φ320×6 | φ340×8 | φ360×8 |
Lifting cylinder dia&number | φ63×4 | φ80×4 | φ80×4 |
Openings | 200MM | 200MM | 200MM |
Closeing time | ≤3S | ≤3S | ≤3S |
Working pressure | 25Mpa | 25Mpa | 25Mpa |
Temperature | ≤200℃ | ≤200℃ | ≤200℃ |
Main motor power | 22.75KW | 22.75KW | 22.75KW |
There are many kinds of plates. If you want to choose suitable plates, you must first understand them.
particleboard, wood-based panel made of wood or other lignocellulosic particles, glued together under heat and pressure after an adhesive is applied.
Density board (MDF) is made of wood fiber or other plant fiber as raw material, prepared by fiber, applied with synthetic resin, and pressed into the plate under the condition of heating and pressure.
Their production technology is different, after a complete process, flatness performance is good.
Particleboard is made from crushed wood, and the thickness error of surface leveling is small.
The surface of density board is smooth after heating and pressurizing.
The MDF has weak stability.
Particleboard interior is the granular form of cross scattered structure, reduced original internal stress and tension of wood, the performance of each department direction is basic and same, transverse bearing force is good, be out of shape not easily thereby.
In contrast, MDF stability, density board grip force is poor, if the screw loose after tightening, it is difficult to be fixed in the same position.
Moisture resistance: particleboard is greater than density board.
In some areas with more humidity in the air, moistureproof is particularly important.
The MDF has poor moisture resistance, and the internal structure of the MDF is easy to swell and become broken when it encounters water for a long time.
Wood deformation and moisture content have a great relationship, the environmental temperature difference is relatively large in the case of deformation.
Usually after the sun after the moisture content will gradually decline, the temperature after the plate will absorb the moisture in the air.
Good moisture resistance can effectively reduce the amount of time and energy we need to pay to maintain furniture in these situations.
Because the edge is rough, easy to absorb moisture, so the furniture sealing edge craft that uses particleboard to make appears particularly important.
As a result of particleboard volume is larger additionally, the furniture that makes with it, opposite at other plank for, also compare heavy.
And the internal granular structure, not easy to milling type.
When cutting the plate, it is easy to cause the phenomenon of teeth, so some processes have higher requirements for processing equipment.
Because the substrate material of MDF is powder as raw material, it uses more glue than particle board, which is more likely to cause environmental problems.
Heavy weight, planing is difficult.
Secondly, due to the MDF glue content is much, the internal structure space is less, moisture resistance is poor.
If a MDF is soaked in water for 24 hours, after more than ten hours, it is obvious that the four sides of the MDF are warped and swollen, and deformed.
Particleboard and density board have different performance. When choosing, we should consider their shortcomings. For example, particleboard is bulky, edge sealing and cutting board are difficult, not easy to milling, and processing equipment is higher.
MDF is heavy, poor moisture resistance, easy to produce environmental problems.
Items model | 1200T | 1800T | 2000T |
Pressure | 12000KN | 18000KN | 20000KN |
Veneer size | 1220*2440MM | 1220*2440MM | 1220*2440MM |
Unit pressure | 40 | 60 | 66 |
Hot plate size | 140/100*1400*2600MM | 150/100*1400*2600MM | 160/120*1400*2600MM |
Main oil cylinder dia&number | φ320×6 | φ340×8 | φ360×8 |
Lifting cylinder dia&number | φ63×4 | φ80×4 | φ80×4 |
Openings | 200MM | 200MM | 200MM |
Closeing time | ≤3S | ≤3S | ≤3S |
Working pressure | 25Mpa | 25Mpa | 25Mpa |
Temperature | ≤200℃ | ≤200℃ | ≤200℃ |
Main motor power | 22.75KW | 22.75KW | 22.75KW |
There are many kinds of plates. If you want to choose suitable plates, you must first understand them.
particleboard, wood-based panel made of wood or other lignocellulosic particles, glued together under heat and pressure after an adhesive is applied.
Density board (MDF) is made of wood fiber or other plant fiber as raw material, prepared by fiber, applied with synthetic resin, and pressed into the plate under the condition of heating and pressure.
Their production technology is different, after a complete process, flatness performance is good.
Particleboard is made from crushed wood, and the thickness error of surface leveling is small.
The surface of density board is smooth after heating and pressurizing.
The MDF has weak stability.
Particleboard interior is the granular form of cross scattered structure, reduced original internal stress and tension of wood, the performance of each department direction is basic and same, transverse bearing force is good, be out of shape not easily thereby.
In contrast, MDF stability, density board grip force is poor, if the screw loose after tightening, it is difficult to be fixed in the same position.
Moisture resistance: particleboard is greater than density board.
In some areas with more humidity in the air, moistureproof is particularly important.
The MDF has poor moisture resistance, and the internal structure of the MDF is easy to swell and become broken when it encounters water for a long time.
Wood deformation and moisture content have a great relationship, the environmental temperature difference is relatively large in the case of deformation.
Usually after the sun after the moisture content will gradually decline, the temperature after the plate will absorb the moisture in the air.
Good moisture resistance can effectively reduce the amount of time and energy we need to pay to maintain furniture in these situations.
Because the edge is rough, easy to absorb moisture, so the furniture sealing edge craft that uses particleboard to make appears particularly important.
As a result of particleboard volume is larger additionally, the furniture that makes with it, opposite at other plank for, also compare heavy.
And the internal granular structure, not easy to milling type.
When cutting the plate, it is easy to cause the phenomenon of teeth, so some processes have higher requirements for processing equipment.
Because the substrate material of MDF is powder as raw material, it uses more glue than particle board, which is more likely to cause environmental problems.
Heavy weight, planing is difficult.
Secondly, due to the MDF glue content is much, the internal structure space is less, moisture resistance is poor.
If a MDF is soaked in water for 24 hours, after more than ten hours, it is obvious that the four sides of the MDF are warped and swollen, and deformed.
Particleboard and density board have different performance. When choosing, we should consider their shortcomings. For example, particleboard is bulky, edge sealing and cutting board are difficult, not easy to milling, and processing equipment is higher.
MDF is heavy, poor moisture resistance, easy to produce environmental problems.