+86-596-7022710     
www.xhc-accessories.com
You are here: HOME » Products » Veneer Dryer » Roller Face Veneer Dryer » Veneer Face Roller Dryer

Latest Products

Contact Us

 
Fujian Zhangzhou, Xintai Industrial Park, Changtai Economic Development Zone, Zhangzhou, Fujian, China
 
 
+86-596-7022710
 

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
sharethis sharing button

Veneer Face Roller Dryer

Veneer Face Roller Dryer is the main equipment for producing plywood, also called Roller Veneer Dryer. The moisture content of the veneer that has just been peeled off is very high. The veneer dryer is mainly used for drying the veneer. It is an economical and small loss to the board to reduce...

Availability:
Quantity:

Wood Veneer Roller Dryer

Veneer Face Roller Dryer is the main equipment for producing plywood, also called Roller Veneer Dryer. The moisture content of the veneer that has just been peeled off is very high. The veneer dryer is mainly used for drying the veneer. It is an economical and small loss to the board to reduce the moisture content of the veneer to achieve Process required by the process. 


The veneer dryer is composed of transmission room, drying room, cooling room and other parts. This equipment has a small one-time investment and highlights the cost-effective advantage. It is a high-tech product with a new concept. It effectively solves the main problems of wood drying in the drying process, such as difficult drying, long drying cycle, uneven drying, easy cracking, deformation and low yield rate.


The veneer face or core dryer generates heat on the board itself through the burning of waste wood, which can solve the temperature gradient and moisture content gradient in the drying process. The temperature of the whole wood is basically the same. The water is discharged from the inside to the outside at the same time so that the expansion and contraction coefficient of the wood is basically the same, so that the wood can avoid deformation, cracking, drying, carbonization and other losses during the drying process, and can improve the yield of the wood.

Roller Face Veneer Dryer Machine

DESCRIPTION XHC-MJ-BG1322

Production target

1.7mm,4*8ft,1.5m³/H→1.2-3mm

Veneer thickness

≥1.5mm

Moisture

80%

Final moinsture

8-10%

Working width

2800 mm→Whole Size 4000MM

Deck number

2

Heating section

2000×8 mm

Cooling section

2000×1 mm

Transmission speed

1.5 ~ 15 m/min

Drying capacity

2.0 m³/h

Pressure Of Compressed Air

0.4-0.5Mpa

Size

25560*4775*3190mm

Motor power

78KW

Effective heat consumption

100Kcal / H

Working Temperature

170℃

Heating Materail

Steam(Working Pressure 0.8Mpa)


Images


core veneer dryer

FACE VENEER DRYER MACHINE

VENEER DRYER FOR CORE

VENEER DRYERVeneer dryer machine

Previous: 
Next: 
Send Inquiry
Copyright © 2024 MUZHIYUAN IMP&EXP All rights reserved.