+86-596-7022710     
www.xhc-accessories.com

Latest Products

Contact Us

 
Fujian Zhangzhou, Xintai Industrial Park, Changtai Economic Development Zone, Zhangzhou, Fujian, China
 
 
+86-596-7022710
 

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
sharethis sharing button

1600T Laminating Hot Press

The short-period laminating hot press is one of the featured products in our company which has simple structure, easy operation and maintenance for pressing the melamine impregnated paper to particleboard and density board.

Availability:
Quantity:

1600t Hot Press Machine For Furniture Plat


Video



 


Process Requirement Of Base Material

1. Process Requirements

Use sanded qualified and fine surface of medium, high density board and particleboard. Plate thickness tolerance < 0.2mm;The surface of the board is smooth and flawless, especially not allowing pits and gaps of crushed materials and shall be clean without dust, water marks or spots; The moisture is advisable with 6-8%. The plate should have 10-14 days to keep in good conditions before laminating which makes the uniform moisture.

2. Requirements For Melamine Impregnated Paper

It adopts the α cellulose base paper which do not contain lignin and is heat-resisting and no deformation (above 180 ℃).

Weight of base paper: 80-120g/m2;The amount of glue applied is 130-150%.

3. Hot Pressing Process Parameters

Hot-pressing temperature is 180-220 ℃

Maximum unit pressure: 5.3MPa

Process Flow

1. Forming Process

The sanded of man-made board is conveyed to near conveyor which already packed the board by forklift. The Melamine impregnated paper is placed on the shelf near the conveyor. The movable stand is back to the front of the conveyor. The operating workers take the one melamine impregnated paper to put in the belt of the conveyor, and then take the one sanded of man-made board to put above the paper, and last take the other melamine impregnated paper to put above the man-made board. All of above, it is finished forming process.

2.Delivery

When the hot press is already finished pressing process, and then opened. The finished board is sucked from the vacuum sucker and transported to the discharging conveyor. In this time, the movable stand is getting into the hot press and putting the man-made board on it and then back quickly. It is second time to form when the movable stand return.

3. Hot Pressing

When the upper hot plate is closed, according to the requirements of the process, it has finished the adding pressure, holding pressure.

4. Discharging

The press has completed the pressing process and then opened. The finished -plate is sucked from the vacuum sucker to the discharging rack.

5. Scraping Edge

The scraper removes paper edges from the surface of the finished board.

6. Cooling

The finished board is cooled.

7. Palletizing

To use the vacuum suckers to grab and palletize the finished product plates that have been positioned. After palletizing, forklifts are used to transport the whole pile of finished product to the warehouse.

1600T Short Cycle Hot Press For Laminating Parameters


Nominal Total Pressure:



16000KN



Veneer Size:



1220*2440MM 



Rated Pressure:



25MPa



Size of Hot Platen:



2600*1400*140/120mm(Q235)



Specification of Main Oil Cylinder:



320*8PCS



Interlayer Spacing:



200MM



Total Weight:



600000KG



Heating Medium:



Oil



Closing Time:



3S



Power:



22.75kw 



Number of Hot Plates:



2PCS



Thickness of Board:



5-30MM



Way of Feeding:



Horizontal



Thickness of Frame:



30MM


Previous: 
Next: 
Send Inquiry
Copyright © 2024 MUZHIYUAN IMP&EXP All rights reserved.