English
One aspect: requirements before starting the hot press.
Aspect 2: what are the temperature and steam pressure of industrial plywood hot press?
The above two are not explained before, so let's do it in detail, hoping to let you know more about this product through learning.
The requirements before starting the hot press are as follows:
(1) The pressure of heat transfer oil shall meet the process requirements and be continuous without interruption.
(2) The upper and lower surfaces of the base plate of the hot press shall be clean, the pressure of the accumulator shall be normal, and the oil level in the oil tank shall be within the normal range.
(3) The lubrication of each transmission part of the equipment shall be kept in good condition, and the electrical equipment can work normally.
What are the temperature and steam pressure of industrial plywood hot press?
Answer: the temperature of industrial plywood hot press is generally 130 ℃ & mdash; 180 ℃, and the steam pressure is 0.2 & mdash; 0.9mpa. However, the details should be determined according to the glue used.
