+86-596-7022710     
www.xhc-accessories.com
You are here: HOME » News » Knowledge » Suggestions for the use of stainless steel plates

Latest News

Contact Us

 
Fujian Zhangzhou, Xintai Industrial Park, Changtai Economic Development Zone, Zhangzhou, Fujian, China
 
 
+86-596-7022710
 

Suggestions for the use of stainless steel plates

Views: 0     Author: Site Editor     Publish Time: 2021-09-07      Origin: Site

Zhangzhou Xinhuacheng is a professional plywood equipment manufacturer. The main products are plywood multi-layer hot press and short cycle veneer press. We often receive emails from customers about how to choose stainless steel plates for the heat press?

The selection of stainless steel plates should consider the operating conditions, such as manual or automatic operation, the performance and type of the hot press, and the quality requirements of the pressed material such as hardness and gloss. Also consider economic accounting and so on. Of course, it is not that the thicker the board, the better, but it should be customized according to the plywood craftsmanship.

In addition, when choosing the most reasonable thickness of the steel plate, its service time, quality, and rigidity should be considered. At the same time, the strength requirements of the plate under compression; thermal conductivity; pressure distribution, and the size of the press plate should be considered.

If the thickness of the steel plate is not enough, it is easy to bend, which will affect the production of decorative panels. If the thickness is too large, the steel plate is too heavy, which not only increases the cost of the steel plate, but also brings unnecessary difficulties to the operation. At the same time, the margin that should be left when the stainless steel plate is processed or used must be considered. The thickness of the steel plate is not absolutely consistent, but the thickness of the same steel plate is as consistent as possible. Generally, the thickness tolerance of the medium-sized saw plate is 0.05 to 0.15 mm. If the requirements are too strict, the grinding costs will also increase. Generally, it is a steel plate with high tensile strength and high hardness. The greater the resistance to mechanical damage, the longer the durability of use, but the cost of grinding processing is also higher.

According to the process of making plywood, if you are making plywood, it is recommended to use a smooth stainless steel plate with a thickness of 1.0/1.0MM, 1.7/1.7MM 0R 3.0/3.0MM. If you are making veneer plywood, it is recommended to use various Style pattern (will be based on the patterns and patterns popular in various countries), the thickness of the steel plate is 5.0/5.0MM. There are also skills for installing stainless steel plates, welcome to inquire, we will provide you with more professional services.




Copyright © 2024 MUZHIYUAN IMP&EXP All rights reserved.