+86-596-7022710     
www.xhc-accessories.com
You are here: HOME » News » Knowledge » MDF Laminating hot press machine

Latest News

Contact Us

 
Fujian Zhangzhou, Xintai Industrial Park, Changtai Economic Development Zone, Zhangzhou, Fujian, China
 
 
+86-596-7022710
 

MDF Laminating hot press machine

Views: 0     Author: Site Editor     Publish Time: 2022-02-11      Origin: Site

The difference between short-cycle double-sided laminating hot press and single-sided multi-layer laminating  hot press


The 1600-ton short-cycle laminating hot press is suitable for single-layer lamination (melamine impregnated paper, pre-painted paper, printing paper and veneer, etc.) processed on the surface of artificial boards such as particleboard, medium and high density fiberboard, plywood, etc.

The 800-1600-ton multi-layer veneer hot press is suitable for the surface lamination of plywood and other wood-based panels, and the lamination paper is melamine impregnated paper. The number of layers is usually from 6 to 10 layers, which is convenient for operation.

 Should we choose a short cycle laminating heat press or a multi-layer laminating heat press?

This mainly depends on what kind of substrate you want to press and paste. If your substrate is particleboard (the particleboard has a relatively uniform structure and good processing performance, it can be processed into large-format plates according to needs, which is the best way to make different specifications and styles. It is a better raw material for furniture. The finished particleboard does not need to be dried again, it can be used directly, and the sound absorption and sound insulation performance is also very good), then we recommend that you choose a short-cycle veneer heat press. If your substrate is multi-layer plywood, then we recommend that you choose a multi-layer veneer heat press.







Copyright © 2024 MUZHIYUAN IMP&EXP All rights reserved.