You are here: HOME » News » Knowledge » Do you know what are the components of a hydraulic cold press?

Latest News

Contact Us

Fujian Zhangzhou, Xintai Industrial Park, Changtai Economic Development Zone, Zhangzhou, Fujian, China

Do you know what are the components of a hydraulic cold press?

Views: 0     Author: Site Editor     Publish Time: 2020-05-08      Origin: Site

The hydraulic cold press can be said to be a kind of furniture making machinery and equipment needed in the production of modern furniture, door sets, and decorative panels. It not only has many special application advantages such as good press quality, fast speed, and high efficiency but also has simple operation and low repair rate, so it is more and more popular with work. But assuming that you want to further develop its good operational advantages, you also need to fully understand the composition of the hydraulic cold press. Today, the hot press manufacturers will give us all the components of the hydraulic cold press.

The main components of the hydraulic cold press:

Mainly composed of: hydraulic system, electrical control system, pressure plate, and fuselage.

Oil pressure system: It consists of an oil cylinder, oil tank, oil pump, oil pump motor, control valve block, and pressure gauge. The oil tank is filled with oil. The oil pump is electrically driven by the oil pump to complete the pump oil. The oil is sent to the oil cylinder through the connecting oil pipe to make the oil cylinder work. The overflow valve can make the pressure piece squeeze

Backpressure occurs during the pressing process, which has a soothing effect and an electromagnetic ball. The valve is used to maintain the pressure set by the system, and the pressure gauge is used to display the pressure.

Electrical control system: It is mainly composed of the main circuit and the control circuit. Active circuit breakers, fuses, AC contactors are used in the circuit to protect the press motor, solenoid valve, etc. from overload, short circuit, loss of voltage, and Undervoltage.

Pressure plate balance organization: The balance is mainly composed of balanced lifting rack, lifting gear, and roll shaft. It consists of fixed rolling bearings and two balance racks on the left and right are mounted on the fuselage. Lifting gears are fixed at both ends of the rolling shaft, and bearings are installed at both ends of the rolling shaft so that the rolling shaft can be flexible

roll. When the pressure plate is raised and lowered, the lifting gear does not balance the rack? Close and roll, so that the pressure plate always maintains balance during the lifting process.

Pressure plate: composed of the upper pressure plate and lower pressure plate. The upper and lower pressure plates are all-welded from profiles and steel plates, and the working plane is averagely processed by a large gantry milling machine to ensure a smooth and smooth working plane. The upper-pressure plate is connected with the cylinder rod of the oil cylinder.

Rise and fall. The lower pressure plate is directly welded to the base of the fuselage. Make the structure of the whole machine tight.

Body: It is welded with sheet steel, with compact structure and good strength.

Copyright © 2024 MUZHIYUAN IMP&EXP All rights reserved.