600T Hydraulic Heat Press Machine

Plywood hot press machine

Our company is mainly specialized in producing the hydraulic heat press(including main hot press, hot platen (Q235 or Q345),hydraulic system, Electric control system（PLC: Vigor from Taiwan, Touch Screen：JIETONG from Taiwan）,oil cylinder, steam system(Automatic constant temperature and drain steam）,steam hoses);cold press, short-period laminating line, automatic conveyor line, automatic cut cross and rip saw line, multi-chip saw, lift table, glue mixer machine, glue spreader machine, small light side pressure hot press machine, synchronous side pressure hot press machine, hot press veneer drier and so on.

Product Application

A variety of best selling specifications are 3*6ft, 3*7ft, 4*4ft, 4*8ft, 4*10ft and 5*10ft of plywood, particleboard, high and medium fiber board, film-faced board, construction formwork and block board. What's more, we also accept the OEM, ODM as well with good services, perfect quality and short delivery included.

Operation method of plywood hot press

①Turn on the power of heat press to check whether the equipment parameters are within the specified range.②Put the hot-pressed product into the hot -pressing fixture to fix it, and do not touch the hot pressed aluminum plate with your hands to prevent burns.③Leave both hands out of the aluminum plate range of the hot press, check that there is no abnormal condition and press the hot press switch to press it down.④The heat pressure will rise automatically after the specified time. In case of abnormal situation, press the emergency switch quickly.⑤Do not put any debris on the top of the heat press or next to the switch to prevent danger.

Precautions for hot pressing of plywood

①  Hot press time: there is 16-24% resin glue in the backstage of veneer dipping, polycondensation reaction occurs during the hot pressing curing process, which will release a lot of heat. The thickness of the product is too large, and the greater the heat released. Therefore, when the product thickness is greater than 25mm, press for 4 minutes/per/mm of product thickness. When the product thickness is less than 25mm, press for 5 minutes/per/mm of product thickness. The hot pressing time is calculated only when the unit pressure and the temperature of the hot pressing plate reach the specified value. ②Heat pressing temperature: hot pressing temperature during loading:40-50 degrees Celsius; hot pressing temperature:145-150 degrees Celsius; hot pressing temperature when slab unloading:40-50 degrees Celsius. ③The time required for the temperature of the board to rise to the  hot pressing temperature: when the product thickness is greater than 25mm,30-40 minutes; when the product thickness is less than 25mm:20 to 25 minutes.

600T Hydraulic Heat Press Machine parameter