Plywood hot press machine can also be used for laminating melamine paper on finished plywood .
Plywood is the ideal product widely used in all kinds of furniture,office supplies,combination speaker , packaging exhibition and other industries.
Main sections of plywood production line include peeling section, veneer drying section,gluing section, cold press section,hot press section, saw edge section, sanding section.....etc.
The thickness range of plywood is generally the 2.4-28mm, board width is generally 915-1220mm. We can design and manufacture any size according to users’ requirements.
Technical parameters, 600ton for example:
| Nominal pressure(T) | 600T |
| Into the board direction | Transverse |
| Number of layers(layer) | 20 layers |
| Layer spacing(mm) | 80mm |
| Number of hot plates | 21 pieces |
| hot plates size(mm) | 1350*2700*52(double in double out ,Q345) |
| Number of cylinder | 3 pieces |
| Diameter(mm) | 3*320 |
| Working Stroke(mm) | 1050 |
| Pressure(Mpa) | ≤25 |
| No-load closing time(S) | 15 |
| Low-pressure pump flow | 250*2(L/min) |
| Allowable pressure(Mpa) | ≤3 |
| ower (Kw) | 15*3 |
| High-pressure pump flow | 25(L/min) |
| Allowable pressure(Mpa) | ≤25 |
| Power(Kw) | 15 |
| Pressure relief valva | 500 |
| Overall dimensions(mm) | LWH3600*1370*4500 |
| Control mode | Automatic and Manually |
| Electric | Vigor |
| Gauge | Vigor |
| Hydraulic valve | Vigor |
| Framework form | Gantry Framework |
| the plate thickness of main part framework(mm) | 30mm |
| Column Width(mm) | 400 |
| Total weight(T) | 50T |