The plywood pre-press is also called the plywood cold press. It is divided into upper cylinder precompressor and lower cylinder precompressor. Before the veneer enters the plywood hot press, it needs to be pre-pressed by the plywood cold press. Plywood pre-pressing, this method can shorten the hot pressing cycle time and improve the quality of the plywood.
①The frame of cold press is made of complete international high-quality steel plates. It includes upper beam, middle beam ,down beam , two pillars ,hydraulic system ,cylinders and etc.
②Reasonable structure design, withstand high pressure.
③Use domestic high-quality oil cylinders, and some hydraulic parts are imported to ensure long-term service life.
④The pressure can be customized according to customer requirements.
Items model | XHCCP-500-2-360-1800 |
Nominal | 5000KN |
Rated pressure | 25Mpa |
Working stroke | 1200 |
Daylight | 1800 |
cylinder | 360x2pcs |
Closing time | 30S |
Total motor power | 7.5KW |
Weight | 22000KG |