The mechanical system of the structural design of the plywood automatic four-side saw-slitting device designed in this design is based on the application of the existing ordinary chainsaw. The requirements are as follows:
(1) There are two chainsaws for the automatic four-sided saw for plywood, and the maximum height of the sawing machine is 15m;
(2) Standardize and refine the sawn plywood by designing a slitting device;
(3) The specifications of the plywood after slitting reach the commonly used specifications in the market: 1220*2440(mm).
(4) Complete the design of the automatic four-side saw-slitting device for plywood in terms of machinery. According to the actual working conditions,
Pay attention to the load. (5) Select the material.
(6) Check the load.
The plywood automatic four-side saw is composed of a front hydraulic lifting device, a front feeding table, a slitting device, a rear feeding table, a transverse shearing device, a rear hydraulic lifting device and a sawdust collection device. The plywood four-sided saw industry must gradually realize automated production to achieve the following characteristics:
(1) The structure is simple, compact and light in weight.
(2) Automatic production, safe and reliable work.
(3) It is convenient to realize centralized control and management with other equipment on the continuous operation line, and the parameters of shear force and platen force can be adjusted.
Easy to adjust and operate.
The commonly used length and width specifications in the market of bad plywood specifications: 1300x2500 (mm) plywood products have a lot of length and width
Specifications, the commonly used length and width specifications are 1220x2440mm, and the thickness specifications are generally: 3, 5, 9, 12, 15, 18mm, etc.