20 openings hot press
20 openings Hotpress includes oil cylinder, hydraulic station, hot oil temperature control system and electric control system. The main frame is made of the beam(up), the beam(middle), the beam(down) and columns. There are 20 layers of hot plates that are designed for S-shaped to make sure the temperature uniformity. Both sides of each hot plate are supported by the holders to sustain on the ladder and guide.
After finished the installation for the Mechanical parts, hydraulic system, electric control system, please clear away the sundries on the hot press(especially for the surface of the hot plates),electric cabinet, hydraulic system and so on and paint oil to the guide holders(middle tray), holders and ladders(for hot plates).
2、Turn on the power and observe whether the power indicator and the voltmeter meet the requirements or not(360-410 v).Observe if the touch screen is displaying well.
3、Open the temperature control switch to make sure it's good running. Turn on the manual circulation pump switch, confirm it's running well. Open the manual inlet oil switch, confirm the electric 3-way thermostatic valve opening and closing with electricity
4、Restore the original factory Settings on the touch screen and load the hot press process parameters.
Main technical parameters(20 openings hot press)：
1. size of overall:5236*2905*1000mm
2. total weight:9.732T
3. movable beam：1.685T
4. size of hot platen：1350*2700*52mm
5. layers：20
6. daylight：80mm
7. normal pressure:450T
8. size of oil cylinders：3*320
9.closing time：23s
10. falling time：24s
11. heat-conducting medium：steam
12.temperature control system: Functional Scheme of Secondary Circulation
13. Energy Consumption：26/pc
11. total power：45KW
12. working pressure：380V 50HZ
FAQ as following:
1. All kinds of parameters can be set by the customer's requirements.
2. All prices are based on FOB, XIAMEN, CHINA.
3. Payment: by T/T 30% down payment, 70% upon machinery completion.
4. Delivery: After finishing all the payment.
5. All the parameters above just for reference, you can update it at any time.
6. Package: With the bubble, naked or as your request.