+86-596-7022710     
www.xhc-accessories.com
You are here: HOME » Products » Hot Press Machine » Veneer Heat Press Machine » Short Period Lamination Hot Press Machine

Latest Products

Contact Us

 
Fujian Zhangzhou, Xintai Industrial Park, Changtai Economic Development Zone, Zhangzhou, Fujian, China
 
 
+86-596-7022710
 

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
sharethis sharing button

Short Period Lamination Hot Press Machine

A hot press is a type of hot press that heats two parts pre-tinned with flux enough to melt and flow the solder. After curing, it creates a permanent electrical and mechanical connection between the part and the solder. The performance of the heat press should vary between different products, and some can choose the heating rate.
Availability:
Quantity:

How To Choose A Veneer Heat Press?

When purchasing a veneer heat press, it is necessary to take this work seriously, because if there is a wrong choice, it will cause product waste and economic losses to users. What you also need to know is that all the Factors are all important considerations, but they are more considered in combination with the actual situation of their own production. There is no need to think too much about a certain item. After all, different types of products are naturally different, so they are not comparable. All that needs to be considered is whether it conforms to the production situation in your own factory to the greatest extent.

Can The Plywood Heat Press Be Used As A Veneer Heat Press?

The plywood hot press is mainly used to process and manufacture plywood, and it is used to hot-press and glue the slabs after gluing. Moreover, different plywood have different requirements for the performance of the hot press. In terms of operation mode, it can be divided into two types: periodic and continuous. Whether it is a veneer hot press depends on whether this type of hot press can be used for hot pressing and veneering. If so, it can be used as a veneer hot press.

Introduction Of Indicators Of Hot Press

What are the advantages and disadvantages of the heating methods of the hot press? In addition, in the hot press, what are the general skills indicators? The above two questions are all that we must understand, because they are closely related to the heat press, so they are very important.


The heating methods of the hot press mainly include steam heating, electric heating and heat transfer oil heating. For steam heating, although it heats up quickly, it needs to use a pressure boiler, and the pressure in the pipeline is relatively high, and the heating temperature is prone to unevenness. And electric heating, although it has the advantages of high heating temperature, high temperature rise and simple control, but its power consumption is relatively large, and the cost is relatively high. Using heat-conducting oil for heating can realize heating under normal pressure, with high heat capacity, small heat loss, and relatively uniform heating temperature. There are generally two technical indicators in the hot press: response speed: the requirement is that the faster the better, which can improve the production efficiency of the machine. Welding accuracy: the higher the requirement, the better, which is beneficial to the operation accuracy.

Hot Press

A hot press is a type of hot press that heats two parts pre-tinned with flux enough to melt and flow the solder. After curing, it creates a permanent electrical and mechanical connection between the part and the solder. The performance of the heat press should vary between different products, and some can choose the heating rate.

Plywood Hot Press

The plywood hot press is one of the most important equipment in the plywood production process. Its main function is to hot-press and glue the slabs after gluing. Of course, not all plywood production can be produced using a plywood heat press. For the production of different plywood, the performance requirements of the plywood heat press are also different, from ordinary plywood to aviation plywood to plastic stickers. The pressure required for the manufacture of marine plywood increases in turn after the panel to the wood laminated plastic board, so when we want to produce plywood, we must have a careful choice of plywood heat press.

Features

The main frame is cut by good quality No.1 standard steel plate, gantry frame structure, strong rigidity and ensure high pressure, divided into welding frame type and bolts connected combined type.

The main frame is cut by good quality No.1 standard steel plate, gantry frame structure, strong rigidity and ensure high pressure, divided into welding frame type and bolts connected combined type.

Micro-computer control system is made by good quality hydraulic unit, fast press, accurate press, high efficiency.

The steam system is designed as a “double inlets and double outlets” arrangement to ensure even temperature distribution.

Automatic electrical controlling, easy & reliable operation. automatic temperature module, and time controlling module, multi-production process technology pressure keeping system, control and ensure high quality board.

Using domestic high-quality oil cylinder, some hydraulic parts are imported, to ensure long term service life.

Previous: 
Next: 
Send Inquiry
Copyright © 2024 MUZHIYUAN IMP&EXP All rights reserved.