2400tons Laminating Hot Press Machine for Melamine Paper

What is a short cycle press?

Short cycle presses are used to refine finishes on boards made of wood materials. Therefore, sanded particleboard and MDF/HDF with a smooth, fine-pored surface are particularly suitable.

What is Features and Functions?

A heat press is used to permanently coat the resin-soaked paper on the surface of the board made of wood material. The resin penetrates into the surface pores and is responsible for adhesion in this way. It also creates a surface that is resistant to various environmental influences. The paper serves as a base for colorless resin and decorative layers. composition: conveying roller ,feeder,Prep table (place paper by hand, put cardboard on conveyor belt and place on top of paper),Automatic board in the feed unit towards the press,MARZOLA short cycle lamination hydraulic heat press (heat transfer oil), specific pressure 41 Kg/cm2, platen size 2,600 x 1,400 mm (for 2.440 x 1.220 mm panel production),Outboard feeding conveyor roller,Longitudinal trimming,Lateral trimming,cooling device,stacker,Complete sets of electrical cabinets, heat transfer oil recirculation pumps, etc. 380V – 50Hz

What is advantage of laminating hot press?

Manufacturers can carry out special decorations for the correspondingly coated wood-based panels. Decorative boards are always much more expensive on the market than uncoated boards, which means that short-cycle presses are always worth the investment. Short cycle presses can be used for two purposes: to produce furniture panels and laminate flooring panels. Both applications use the same functional principles, but differ in the type and range of components used. Both sides of the wooden boards used to make furniture require a high-quality finish. These boards are usually sold as boards cut to size. Customers expect very high quality. Sheets for laminate flooring are cut at the factory and the sheet edges are ready for the intended use. Embossed board can be used as a board for both purposes to create the feel of real wood. This plate can be used to imprint a pattern on the surface that matches the printed design. Short cycle lamination hot pressing line for melamine veneered particleboard or MDF board impregnated paper

Technical characteristics of the panel

Minimum 1220 x 2440 mm

up to 1850 x 2750 mm

thickness…………………. 9 – 30 mm

Thickness variation………………………………………………± 0.15 mm

Plate battery height at maximum input ………… 1000 mm

Maximum stack height of coated boards…………………….. 800 mm

Open press with top-down closing and hydraulic oil operation.

Key Features OMECO Short Cycle Lamination Heat Press

Maximum total pressure…………………………………………. ± 1,800 tons

Platen size…………………………………… 1400*2800mm

Opening…………………………………………………………. ± 120 mm

cylinder………………………………………………………………. 6 x Ø 320mm

Working pressure 280 bar

Specific pressure in a 1850 x 2750mm panel………….30 kgf/cm²

Maximum working temperature...220℃

Height of press table………………………………..1000 mm

Loading side ……………………………………………… 1950 mm

Approximate weight………………………………………………. ± 65 tones